The Mi Electric Scooter Pro 2 has a multifunctional dashboard with central controls designed for easy use. The scooter displays an aerospace-grade aluminium body and is foldable in three seconds making it very compact. It features a fifth-generation BMS smart battery management system to keep the battery safe and extend battery life. Experience the new generation energy recovery system. Enjoy the 600W powerful motor performance which can take you up to 45 kilometres. The scooter offers three-speed modes with an easy switch. Easily control the Mi Electric Scooter Pro 2 with the Mi Home app.
Please Note: Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-scooters, e-bikes and e-boards (including where e-scooters, e-bikes and e-boards can legally be used and whether e-scooters, e-bikes and e-boards need to be registered with the relevant road traffic authority). Any user of this product must ensure that that they check and abide by their local by-laws and use responsibly. Ride with caution and always wear a helmet and protective gear when riding your e-scooter, e-bike and e-board. Before riding your e-bike, e-scooter and e-board ensure the bolts are tight and the battery is charged.
General
Product model number
FBC4025GL
Braking
E-ABS and disc brake
Tires
8.5" front and rear pneumatic tires
Controller undervoltage protection
29V±0.5V
Controller current limit
17A±0.5A
Motor type
Brushless DC motor
Working temperature
-10°C to 40°C
Storage temperature
-20°C to 45°C
Battery Specs
Battery type
Lithium ion battery
Rated capacity
12800mAh/474Wh
Maximum charging voltage
42 VDC
Charging temperature range
0°C~+40°C
Discharge temperature range
-20°C~+50°C
Cyclical lifetime
500 charging cycles with power maintained above 70%
Adapter Specs
Input voltage
100-240VAC 50/60Hz
DC cable port type
Custom Φ8.0*1.6mm
Package Contents
1x Mi Electric Scooter Pro 2, 1x Power adapter, 1x Hexagon wrench, 1x Extended nozzle adapter, 5x Screws, 1x Tire, 1x User Manual, Important information, Specifications
Q: How to set up the PRO 2?
- You need to download the Xiaomi home App on your phone. This can be done by scanning the QR code inside the user manual.
- Turn on the scooter by pressing the power button on Control Panel once.
- Turn on Bluetooth on phone.
- Follow the instructions on APP to pair PRO 2 with APP to unlock the speed limit.
Q: How do the breaks work on PRO 2?
First, slow down by releasing the throttle; Squeeze the electronic brake on the handlebar.
Q: How do the lights work?
A: Press the power button on the Control Panel once to turn on the light.
Q: How do you move on PRO 2?
- Stand on the footrest with one foot and push off with another foot to start gliding.
- Put your other foot on the footrest to keep both feet stable. Press the throttle on the right hand to speed up when you are balanced.
Q: Can I ride by pressing the throttle only? Without using my foot to glide.
A: No, for your safety, the motor will not engage until PRO 2 reach 4km/hr
Q: How many speeds modes are there on the PRO 2, what do they do?
A: There are three modes. Double press the power button to change mode.
- Pedestrian mode: 5km/hr
- D mode: 20km/hr
- S mode: 25km/hr
Q: What is the recommended age for riding PRO 2?
A: 14 years +
Q: What is the recommended height to use PRO 2?
A: 120-200cm
Q: What is the load of a PRO 2?
A: 30-100kg
Q: How far can you go on a PRO 2?
A: Up to 45km.
Q: How heavy is a PRO 2?
A: 14.2kg
Q: How long does it take to charge a PRO 2?
A: Charging time depends on the battery status; it takes up to 4 hours for a full charge from zero percent.
Q: How fast can PRO 2 go? *under good road condition and good weather condition
A: Up to 25km/hr
Q: What is the motor power output for PRO 2?
A: 600W
Q: Are PRO 2 waterproof?
A: PRO 2 has an IP rating of IP54, which means they can handle rain and splashes.
Please Note: Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-scooters and e-boards (including where e-scooters and e-boards can legally be used and whether e-scooters and e-boards need to be registered with the relevant road traffic authority). Any user of this product must ensure that that they check and abide by their local by-laws and use responsibly. Ride with caution and always wear a helmet and protective gear when riding your e-scooter and e-board.
